Technical
Electrical Manufacturing Robot Showcase Programming CAD/Design
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
|
So You Want To Build an Auto Aim System: The Dramatically Overstated Definitive Guide To Shooting Things Good
Preface This post is my attempt to give an introduction to and overview of building an auto-aim system for RoboMaster. It’s based purely on my own experience, and is essentially just opinion. I am not an expert. I hav… |
|
3 | 3215 | August 20, 2024 |
| About the Technical category |
|
0 | 387 | July 22, 2021 |
| UCI Legacy Robotics CAD |
|
1 | 46 | September 2, 2024 |
| Open Source Resources Archive |
|
0 | 142 | July 18, 2024 |
| "TDA4VM" chip family for embedded vision processing |
|
6 | 2532 | December 28, 2022 |
| Fixing Your VTM Modules For New Server Versions |
|
2 | 838 | May 17, 2023 |
| Chinese Open-Source CAD Access |
|
3 | 1346 | October 23, 2022 |
| Performing surgery to fix Jetson Xavier NX --> DJI Type-C Development board UART communication |
|
0 | 1243 | September 22, 2022 |
| Weekly Thread #1: Vision Processing Boards |
|
1 | 514 | September 21, 2022 |
| RMUL / RMUC Field CAD? |
|
7 | 1735 | May 3, 2022 |
| Setting up the Supercapacitor Management Module CM01 as part of the referree system |
|
2 | 1416 | October 13, 2021 |
| Super Capacitor Team Resources/Information Repository |
|
1 | 1190 | October 13, 2021 |
|
How to Write and Deploy Code to the Development Board Type A
We are building our team completely from scratch since everyone who was on the team years before have now graduated. We have a lot of old materials and devices but no knowledge of how to use them. Specifically, we have a… |
|
4 | 2885 | August 20, 2024 |
| Mouse Input to Gimbal Angle Conversion |
|
0 | 703 | July 28, 2021 |
| Infantry Showcase - CU Robotics 2021 |
|
1 | 606 | July 23, 2021 |
| Intro meeting (Saturday, July 24th): Taproot, a framework for programming RoboMaster robots |
|
0 | 807 | July 23, 2021 |